This is a publication of:

             Fluke Industrial B.V.
             DIAGNOSTIC TOOLS DIVISION
             Almelo, The Netherlands
             © 1994, 1999 Fluke Corporation

   Product:  SW90W for Windows®
             FlukeView® Software
             for use with Fluke
             ScopeMeter® test tools

   Version:  3.0
   Date:     July 28, 1999

   Contents: 1. FlukeView 3.0 Software for Windows 95/98 NT 4.0
             2. FlukeView 2.1 Software for Windows 3.x
             3. Acrobat Reader Software
             4. PM9080 Software
   ____________________________________________________________

   Contents of the CD:

   1. FlukeView 3.0 Software for Windows 95/98 NT 4.0
      - Folder \SW90W_30
      - English, French and German Version
      - Run \SW90W_30\ENGLISH\CDROM\SETUP.EXE to install.
      - To create diskettes for floppy installations, run
        SETUP.EXE or copy the DISK1, DISK2, and DISK3
        directories to individual floppy disks and run 
        setup.exe from disk 1.
      - FlukeView V3.0 On-line manuals in .PDF format. 
        If not installed yet, install ACROBAT READER to read 
        and print the manual.

   2. FlukeView 2.1 Software for Windows 3.x
      - Folder \SW90W_21
      - English, French and German Version
      - Fully supported instruments are: 
           Fluke 97, 99, 105, 96B, 99B, 105B and 123. 
      - Screen capture only is supported for: 
           Fluke 91, 92, 96 and 92B. 
      - Run \SW90W_21\ENGLISH\DISKETTE\SETUP.EXE to install.
      - For floppy installations, copy the DISKETTE directory
        to a floppy disk and run setup.exe from floppy disk.
      - FlukeView V2.1 On-line manuals in .PDF format. 
        First install ACROBAT READER to read and print the 
        manuals.

   3. Acrobat Reader Software
      - Folder \ACROBAT
      - For reading the On-line documentation on this CD.
      - Run \ACROBAT\AR32E301.EXE for installation on a 
        Windows 95/98/NT system.
      - Run \ACROBAT\AR16E301.EXE for installation on a 
        Windows 3.x system.

   4. PM9080 Software
      - Folder \PM9080
      - Remote control and programming reference.
      - Manuals and a demo program for several Fluke
        Portable Test Tools.
   ____________________________________________________________

   End of the README.TXT file.